Loudspeaker congurations
Pre-alignment delays
presets pre-alignment delay values and polarity settings
[K1] + [K1SB_60] K1 = 6 ms K1-SB = 0 ms
Geometric delays
1.5 m (5 ft) Line source = 4.5 ms
2 m (7 ft) Line source = 6 ms
KS28 or SB28
The KS28/SB28 subwoofers provide an extension of the bandwidth in the low end, down to 25 Hz.
Line source with KS28 or SB28
[PRESET]
[xxxx_60]
K1 LINE SOURCE /
K1/K1-SB LINE SOURCE
Enclosure K1 K1-SB in line source K1-SB as subwoofer KS28 or SB28
Preset [K1] [K1SB_X] [K1SB_60] [xxxx_60]
Frequency range (-10 dB) 25 Hz - 20 kHz
Recommended ratio 1 K1 : 1 subwoofer
Grouping subwoofers
Place the subwoofer enclosures side by side. If not possible, the maximum distance between two adjacent
acoustic centers must be 2.8m or 1.7m if the upper frequency limit of the subwoofer system is at 60Hz or
100Hz, respectively.
K1 user manual (EN) version 6.0 13