Chapter 5: Using The Cabinet
Product Service 1-800-522-7658
28
Original instructions
Navigating the Logic+ Menu Screens
MyLogic
TM
allows you to use the Smart-Start or Night-Smart features that
activate functions automatically when the sash is opened or closed.
If equipped, the UV lamp can be programmed to operate for a given time
interval when the sash is closed, before it shuts off.
NOTE: When you are in the menu mode, if a selection is not made within
30 seconds, the display will reset back to display mode.
Keypad operations are shown as blue bold italic. Menu screen selections are
shown as green italics.
NOTE: Pressing the appropriate touchpad button will override Smart-
Start or Night-Smart selections.
To access the menu, press the Menu button. The display panel will show the
first level menu. To select from the various menu options press the ▲ or ▼
buttons until the selected option is displayed. Press OK to accept that option,
or press Menu to return to the previous menu level.
Menu
Display Mode Menu Mode
To Next Page
Loading...
Need help?
General
