Chapter 5: Using The Cabinet
Product Service 1-800-522-7658
31
Original instructions
If you choose to use Night-Smart option for the
UV lamp, this screen allows you to control the
time the UV lamp will remain on after the sash
is closed. Use the ▲ and ▼ buttons on the
touchpad to cycle through the time intervals
available, and then press OK to select it. The
screen will then return to the first MyLogic
screen.
Navigating the Settings Menu Screens
The Settings screens will allow an administrator to set some of the cabinet’s
operational parameters. Please note all Settings screens have a green
background.
Using the ▲ and ▼ buttons on the touchpad, highlight the Settings option-it
will turn green when selected. Press OK to enter the first Settings screen:
OK Button
Display Options
Units of Measure
Note: The Units of Measure refers to the display
of airflow velocities if the cabinet is equipped
with the optional airflow sensor.
Using the ▲ and ▼ buttons on the touchpad,
highlight the Units of Measure option-it will
turn white when selected, and then press OK.
Using the ▲ and ▼ buttons on the touchpad,
highlight either metric or imperial units of
measure-it will turn white when selected, and
then press OK. The screen will then return to
the first Settings screen.
To Next Page
Loading...
Need help?
General
