2. Scroll down and then press *IOK
to select Options.
Main Menu
Measure
Data Logging
* Options
16:02:19 01/04/05
3. Scroll down and then press *IOK
to select Turbidity.
Options
Averaging
* Turbidity
Date/Time
Language
16:02:19 01/04/05
4. Press the *IOK to select Units. Turbidity
*Units
Calibration
16:02:19 01/04/05
5. Scroll down and then press *IOK
to select units.
Available units are: NTU
(Nephelometric Turbidity Units);
FNU (Formazin Nephelometric
Units); ASBC (American Society of
Brewing Chemists); EBC (European
Brewery Convention)
Units
NTU
FNU
ASBC
EBC
16:02:19 01/04/05
Note: If Attenuation is chosen as a calibration curve. The result will be reported in
FAU (Formazin Attenuation Units).
6. Press to exit to a previous menu or
make another menu selection or
press OFF to turn the meter off.
OPTIONS & SETUP • TURBIDITY UNITS 9
To Next Page
Loading...
