lancer Series 500 - Default Chapter; Table of Contents

ABOUT THIS MANUAL
This booklet is an integral and essential part of the product and should be handed over to the operator after the instal-
lation and preserved for any further consultation that may be necessary. Please read carefully the guidelines and warn-
ings contained herein as they are intended to provide the user with essential information for the continued safe use
and maintenance of the product. In addition, it provides GUIDACE ONLY
to the user on the correct services and site
location of the unit.
The installation and relocation, if necessary, of this product must be carried out by qualied personnel with up-to-date
safety and hygiene knowledge and practical experience, in accordance with current regulations.
TABLE OF CONTENTS
SPECIFICATIONS................................................................................................................................4
PRE-INTALLATION CHECKLIST........................................................................................................5
WARNINGS/CAUTIONS...................................................................................................................6-9
1. INSTALLATION............................................................................................................................10
1.1 RECIEVING THE UNIT.......................................................................................................10
1.2 UNPACKING........................................................................................................................10
1.3 INSTALLATION....................................................................................................................10
1.4 CONNECTING TO ELECTRICAL POWER.........................................................................11
1.5 CONNECTING TO WATER SUPPLY...................................................................................11
1.6 CONNECTING TO CO
2
......................................................................................................12
1.7 CONNECTING TO BAG-IN-BOX (BIB) SYRUP SUPPLY TO REMOTE SYRUP PUMPS.12
1.8 PURGING THE CARBONATION SYSTEM.........................................................................12
1.9 PURGING THE WAER AND SYRUP SYSTEMS................................................................12
1.10 ADJUSTING WATER FLOW (LEV®)..................................................................................13
1.11 ADJUSTING WATER TO SYRUP (RATIO) BRIX (LEV®)..................................................13
2. SCHEDULED MAINTANANCE...................................................................................................13
2.1 DAILY...................................................................................................................................13
2.2 WEEKLY..............................................................................................................................13
2.3 MONTHLY............................................................................................................................13
2.4 EVERY SIX MONTHS.........................................................................................................13
2.5 YEARLY...............................................................................................................................14
3. DISPENSER CLEANING AND SANITIZATION..........................................................................14
3.1 GENERAL INFORMATION.................................................................................................14
3.2 CLEANING AND SANITIZING SOLUTIONS.......................................................................14
3.3 AMBIENT PROCESS..........................................................................................................14
3.4 VALVES...............................................................................................................................15
4. TROUBLESHOOTING.................................................................................................................16
4.1 WATER LEAKAGE AROUND NOZZLE...............................................................................16
4.2 LEAKAGE BETWEEN UPPER AND LOWER VALVE BODIES..........................................16
4.3 MISCELLANEOUS LEAKAGE............................................................................................16
4.4 INSUFFICIENT WATER FLOW..........................................................................................16
4.5 INSUFFICIENT SYRUP FLOW...........................................................................................16
4.6 ERRATIC RATIO.................................................................................................................16
4.7 NO PRODUCT DISPENSED..............................................................................................17
4.8 WATER ONLY DISPENSED; NO SYRUP; OR SYRUP ONLY DISPENSED,
NO WATER.........................................................................................................................17
4.9 VALVE DOES NOT SHUT OFF..........................................................................................17
4.10 EXCESSIVE FOAMING......................................................................................................17
2