EasyManua.ls Logo

Lancom DSL Series - Page 51

Lancom DSL Series
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 5: Linking two networks
51
EN
In case your device has an ISDN connection, the wizard asks whether the
remote site has ISDN as well.
The type of IP address must be stated for both sides for VPN connections
via the Internet. There are two types of IP addresses: static and dynamic.
An explanation of the two IP address types can be found in the reference
manual.
Thanks to Dynamic VPN, connections can be enabled not only
between gateways with fixed, static IP addresses, but even between gate-
ways with dynamic IP addresses. The active initiation of VPN connec-
tions towards remote sites with dynamic IP addresses requires ISDN.
If you haven't already named your LANCOM Wireless DSL, the wizard will
ask you for a new, unique device name. With this entry, you will rename
your LANCOM Wireless DSL. Be sure to give the two devices different
names.
The name of the remote station is needed for its identification.
Enter the subscriber number of the remote station in the ISDN subscriber
number field. The complete subscriber number including all necessary
area and country codes is required.
The stated ISDN caller ID is used to identify and authenticate callers.
When a LANCOM Wireless DSL receives a call, it compares the ISDN caller
ID entered for the remote station with the actual caller ID transferred via
VPN IP address of remote station '10.0.2.100' '10.0.1.100'
VPN IP network address of the remote network '10.0.2.0' '10.0.1.0'
VPN Netmask of the remote network 255.255.255.0 255.255.255.0
VPN Domain name of the remote network 'head' 'branch'
VPN Hide local stations for access to remote net-
work (Extranet VPN)?
yes/no yes/no
ISDN TCP/IP routing for access to remote network yes/no yes/no
ISDN IPX routing for access to remote network yes/no yes/no
VPN + ISDN NetBIOS routing for access to remote net-
work?
yes/no yes/no
VPN + ISDN Name of remote workgroup (NetBIOS only) 'workgroup1' 'workgroup2'
ISDN Data compression on/off on/off
ISDN Channel bundling on/off on/off
Coupling Entry Gateway 1 Gateway 2

Table of Contents

Related product manuals