LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 6: Providing dial- up access
62
EN
Please notice the following relationship between the names of the
entries of the LANCOM VPN Client and the LANconfig wizard:
6.2.2 Dial-up via ISDN
A number of settings must be configured on the dial-in computer. These are
briefly listed here, based on a Windows computer:
Dial-Up Networking (or another PPP client) must be correctly configured
Network protocol (TCP/IP, IPX) installed and bound to the dial-up adapter
New connection in Dial-Up Networking with the call number of the router
Terminal adapter or ISDN card set to PPPHDLC
PPP selected as the Dial-Up server type, 'Enable software compression'
and 'Require data encryption' unchecked
Select desired network protocols (TCP/IP, IPX)
Additional TCP/IP settings:
Assignment of IP address and name server address enabled
'IP header compression' disabled
These settings will permit a PC to dial into a remote LAN via ISDN and access
its resources in the usual manner.
6.3 Instructions for LANconfig
햲 Launch the 'Provide Dial-In access (RAS)' wizard. Follow the wizard's
instructions and enter the required information.
LANCOM VPN Client LANconfig
Preshared Key Shared Secret
PPTP User name Name
PPTP password Password
To Next Page
Loading...
