Lancom DSL Series - Instructions for WEBconfig

LANCOM Wireless DSL – LANCOM Wireless ADSL
 Chapter 6: Providing dial- up access
63
EN
햳 The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with Finish.
햴 Configure Dial-Up Networking access on the dial-in PC as described.
Next, test the connection (see box ’Ping – quick testing for TCP/IP connec-
tions’ →page 56).
6.4 Instructions for WEBconfig
RAS access via VPN cannot be configured using the wizard under
WEBconfig yet. It can only be set up in the expert configuration. For
details, please refer to the reference manual.
햵 From the main menu, launch the 'Connect two local networks' wizard.
Follow the wizard's instructions and enter the required information.
햶 Configure Dial-Up Networking access on the dial-in PC as described.
Next, test the connection (see box ’Ping – quick testing for TCP/IP connec-
tions’ →page 56).