Lancom DSL Series - General information

LANCOM Wireless DSL – LANCOM Wireless ADSL
 Chapter 6: Providing dial- up access
58
EN
6.1.1 General information
The following entries are required to set up a RAS connection. The first column
indicates whether the information is required for a connection via VPN
(standard method using “preshared keys“) and/or ISDN .
Further details to RAS connections via VPN using enhanced methods
can be found in the LCOS reference manual.
Notes to the individual values:
 User name and password: Users authenticate themselves with this
information when dialling in.
 Incoming number: The LANCOM Wireless DSL uses the optional ISDN
caller ID as an additional user authentication. This security function
should not be used when users dial in from differing locations.
Please refer to chapter ’Zwei Netzwerke verbinden’ auf Seite 50 for
advice about the other values required for the installation of a RAS
access.
Coupling Entry
VPN + ISDN User name
VPN + ISDN Password
VPN Shared secret for encryption
VPN Hide local stations for access to remote network (Extranet VPN)?
ISDN Incoming number of remote station
ISDN TCP/IP routing for access to remote network
ISDN IPX routing for access to remote network
VPN + ISDN IP addresses for the dial-up PCs: static or dynamic by address range (IP
address pool)
VPN + ISDN NetBIOS routing for access to remote network?
VPN + ISDN Name of remote workgroup (NetBIOS only)