Combined Function Operations
32
2
❒ The copying screen is displayed as default after power on. You can change
this default setting. See p.55 “Function Priority”.
-System Reset
The machine returns automatically to its initial condition when the job is fin-
ished, after a certain period of time has elapsed. This function is called "System
Reset".
Note
❒ You can change the System Reset time. See p.62 “System Auto Reset Timer”.
AHR037S
RuC4_EN_gsg-F_FM_forPaper.book Page 32 Tuesday, April 5, 2005 12:06 PM
To Next Page
Loading...
