Lanier LD225 - Routing Received Documents with SUB Code

Authentication Information
79
5
F Press [Print Counter List] under Per
User.
Note
❒ Enter the user code, and then
press [#] if the user code is regis-
tered.
G Select the function usage you
want to print from [Print Counter],
[Transmission Counter], and [Scanner
Counter].
H Press [Print].
To print the number of prints
for all user codes
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Administrator Tools].
D Press [Display / Clear / Print Counter
per User].
E Press [Print Counter List] under All
Users.
Note
❒ Enter the user code, and then
press [#] if the user code is regis-
tered.
F Select the function usage you
want to print from [Print Counter],
[Transmission Counter], and [Scanner
Counter].
G Press [Print].
Clearing the Number of Prints
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Administrator Tools].
D Press [Display / Clear / Print Counter
per User].
E Select the user code to clear.
To clear the number of prints
made under a user code
A Select the user code from the
left side of the display.
Note
❒ Press [Select All on the Page] to
select all user codes on the
page.
B Press [Clear] under Per User
Codes.
C Select the function usage you
want to clear from [Print Coun-
ter], [Transmission Counter], and
[Scanner Counter].
D Press [OK].
RuC4_EN_gsg-F_FM_forPaper.book Page 79 Tuesday, April 5, 2005 12:06 PM