LanParty X48 - Advanced Chipset Features

65
3
BIOS Setup
Advanced Chipset Features
This section gives you functions to configure the system based on
the specific features of the chipset. The chipset manages bus speeds
and access to system memory resources. These items should not
be altered unless necessary. The default settings have been chosen
because they provide the best operating conditions for your system.
The only time you might consider making any changes would be if
you discovered some incompatibility or that data was being lost
while using your system.
PCI-E Compliancy Mode
This field is used to select the mode for the PCI Express add-in
card.
PEG Force x1
The options are Enabled and Disabled.
Init Display First
PCI Express Slot When the system boots, it will first initialize the
PCI Express Master graphics card.
PCI Slot When the system boots, it will first initialize
PCI.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Item Help
Menu Level
X
↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
PCI-E Compliancy Mode
PEG Force X1
Init Display First
v1.0a
Disabled
PCI Slot