Getting Started
3 - 1
3 - Getting Started
It is important to consider the following points before logging into and conÞguring the
MPS:
¥ The MPS IP address must be conÞgured before any TCP/IP
functionality is available. (See
Setting the IP Address
on page 4-2.)
¥ There are two important passwords on the MPS: the privileged
password and the login password.
Changing any server, service, or port setting requires privileged user
status. The default privileged password is
system
.
The login password is required for remote console logins. The
default login password is
access
.
NOTE:
If you would like to change either the privileged or login password,
either use EZWebCon or refer to the Print Server Reference Manual
located on the CD-ROM.
To Next Page
Loading...
