Lantronix MPS100 Installation Guide

LAN Manager/DLC Configuration
8 - 1
8 - LAN Manager/DLC Configuration
The EZWebCon conÞguration software is the easiest way to conÞgure the MPS. This
chapter explains DLC conÞguration for Windows NT 4.x hosts. Windows 95 does not
support DLC printing (see Chapter 4, TCP/IP ConÞguration, for more information).
NOTE: The Server needs an IP address before you can use EZWebCon. See
the Setting the IP Address section on page 4-2 for instructions.
NOTE: Printing using an LPD client is the preferred method for sending
print jobs to the MPS. To print using the TCP/IP protocol see the
Using the Command Line Interface section on page 4-8.
8.1 DLC Configuration
8.1.1 Server Configuration
To use the DLC protocol, you must have one service with the DLC characteristic enabled.
Use the DeÞne Service servicename DLC Enabled command. The DLC characteristic
may be associated with only one service on a given MPS.

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English