Lantronix MPS100 Installation Guide

NetWare Configuration
5 - 1
5 - NetWare Configuration
The EZWebCon conÞguration software is the easiest way to conÞgure the MPS. The
following sections cover print conÞguration methods for NetWare hosts.
NOTE: The Server needs an IP address before you can use EZWebCon. See
the Setting the IP Address section on page 4-2 for instructions.
This chapter explains creating NDS print queues with NetWare Administrator and with
the PCONSOLE Quick Setup option. To create NDS print queues, you must be running
NetWare version 4.x with NDS capabilities.
If you are running NetWare versions 2.x, 3.x, or version 4.x with bindery emulation, you
may conÞgure bindery print queues using QINST (bindery only) or PCONSOLE. For
more information, see the NetWare chapter of the Print Server Reference Manual, located
on CD-ROM.

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English