Lantronix MPS100 Installation Guide

Frequently-used Commands
F - 2
F.1 Server Commands
Table F-1: Frequently-used Server Commands
Command Option(s) Description
DEFINE SERVER BOOTP {EN|DIS} Enables or disables querying for a BOOTP host at
system boot time.
DEFINE SERVER DHCP {EN|DIS} Enables or disables querying for a DHCP host at
system boot time.
DEFINE SERVER GATEWAY ipaddress SpeciÞes the host to be used as a TCP/IP
gateway to forward packets between networks.
Enter an IP address.
DEFINE SERVER
INCOMING option
BOTH Enables incoming LAT and Telnet connections.
LAT Enables only incoming LAT connections.
NONE Disables incoming connections.
TELNET Enables only incoming Telnet connections.
PASSWORD Causes the server to prompt for a password for
all incoming connections.
NOPASSWORD Allows connections to be established without
prompting for a password.

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English