Frequently-used Commands
F - 5
DEFINE SERVICE
“name” option
DLC {EN|DIS} SpeciÞes which service will handle print requests
from DLC hosts. DLC can be enabled on one
service per Server.
BANNER {EN|DIS} When Enabled, causes the Server to print a
banner page before jobs.
BINARY {EN|DIS} When Enabled, the Server will not process data
passed through the service. This characteristic
should be enabled when printing PCL data.
EOJ string Causes the Server to send an end-of-job string to
the attached device after every job. Enter an end
string or the word none.
FORMFEED {EN|DIS} When Enabled, causes the Server to append a
formfeed to the end of LPR print jobs.
POSTSCRIPT
{EN|DIS}
When Enabled, causes the Server to assume the
attached device is a PostScript device and act
accordingly.
PSCONVERT {EN|DIS} When Enabled, causes the Server to place a
PostScript wrapper around each job.
SOJ string Causes the Server to send a start-of-job string to
the attached device before every job. Enter a start
string or the word none.
Table F-1: Frequently-used Server Commands, cont.
Command Option(s) Description
To Next Page
Loading...
