MCX4 Max Pro 140 Watts 4’’ 2-Way Speakers
Standard 4’’ Size Fits OEM Locations •
High Quality Injection Cone •
Non-Fatiguing Butyl Rubber Surround •
1’’High Temperature Voice Coil •
0.5’’ Titanium Neo-Tweeter •
Livid Coated Steel Basket •
15 Oz Magnet Structure •
Power Handling: 70 Watts RMS / 140 Watts Peak •
Frequency Response: 66-20KHz •
Impedance: 4 Ohms •
Mounting Depth: 2.15’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
MCX5 Max Pro 160 Watts 5.25’’ 2-Way Speakers
Standard 5.25’’ Size Fits OEM Locations •
High Quality Injection Cone •
Non-Fatiguing Butyl Rubber Surround •
1’’High Temperature Voice Coil •
0.5’’Titanium Neo-Tweeter’’ •
Livid Coated Steel Basket •
15 Oz Magnet Structure •
Power Handling: 80 Watts RMS / 160 Watts Peak •
Frequency Response: 55-20KHz •
Impedance: 4 Ohms •
Mounting Depth: 2.45’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
MCX6 Max Pro 200 Watts 6.5’’ 2-Way Speakers
Standard 6.5’’ Size Fits OEM Locations •
High Quality Injection Cone •
Non-Fatiguing Butyl Rubber Surround •
1’’High Temperature Voice Coil •
1’’Titanium Neo- Tweeter •
Livid Coated Steel Basket •
15 Oz Magnet Structure •
Power Handling:100 Watts RMS / 200 Watts Peak •
Frequency Response: 45-22KHz •
Impedance: 4 Ohms •
Mounting Depth: 2.56’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
MAXP124D Max Pro 12’’ 1600 Watt Small Enclosure Dual 4 Ohm Subwoofer
Black Non-Pressed Paper Cone •
Specially Treated Foam Edge Suspension •
Stamped Steel Basket w/Hex Key Input Terminal •
Bumped Vented Motor Structure •
Custom Designed Rubber Magnet Boot •
2’’ Dual Layer High Temperature Kapton •
Voice Coil
80 + 80 oz. Heavy Double Stacked •
Magnet Structure
1600 Watts Peak Power •
Dual 4 Ohms Nom. Impedance •
Fs: 40Hz, Qms:5.0, Qes: 0.90, Qts: 0.75, •
SPL: 84(dB), Vas: 5.204(Cuft)
Mounting Depth: 5.76”•
MAXP154D Max Pro 15’’ 2000 Watt Small Enclosure Dual 4 Ohm Subwoofer
Black Non-Pressed Paper Cone •
Specially Treated Foam Edge Suspension •
Stamped Steel Basket w/Hex Key Input Terminal •
Bumped Vented Motor Structure •
Custom Designed Rubber Magnet Boot •
2.5’’ Dual Layer High Temperature Kapton •
Voice Coil
100 + 100 oz. Heavy Double Stacked •
Magnet Structure
2000 Watts Peak Power •
Dual 4 Ohms Nom. Impedance •
Fs: 30Hz, Qms: 5.0, Qes: 0.90, Qts: 0.75, •
SPL: 89(dB), Vas: 6.02(Cuft)
Mounting Depth:7.64”•
max pro series subwoofers
To Next Page
