VST 0.5” Neodymium Flush, Surface or Angle Mount Tweeters
.5’’ Mylar Dome •
High Density Neodymium Magnet •
Tri-Way Mounting System: Flush, Surface •
or Swivel
Ferro Fluid Cooling •
12dB Crossover Network •
Frequency Response: 1.3-22k Hz •
SPL: 92 dB @ 1W/1M •
Power Handling: 100 Watts•
VX320 VX 3.5’’ Two-Way Speakers
Standard 3.5’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Neodymium Dome Tweeter •
Power Handling: 40 Watts RMS/80 Watts Max •
Impedance: 4 Ohms •
Frequency Response: 66-20kHz •
Rubber Boot Magnet Cover •
Mounting Depth: 1.65’’ •
Includes Wires and Installation Hardware•
VX420 VX 4’’ Two-Way Speakers
Standard 4’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Neodymium Dome Tweeter •
Power Handling: 50 Watts RMS/100 Watts Max •
Impedance: 4 Ohms •
Frequency Response: 66-20kHz•
Rubber Boot Magnet Cover •
Mounting Depth: 1.83’’ •
Includes Grills, Wires and Installation Hardware•
VX430 VX 4’’ Three-Way Speakers
Standard 4’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Neodymium Dome Tweeter •
Power Handling: 75 Watts RMS/150 Watts Max •
Impedance: 4 Ohms •
Frequency Response: 66-20kHz •
Rubber Boot Magnet Cover •
Mounting Depth: 1.75’’ •
Includes Grills, Wires and Installation Hardware•
VX462 VX 4’’x 6’’ Two-Way Speakers
Standard 4’’ x 6’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone•
1’’ High Temperature Voice Coil•
Neodymium Dome Tweeter•
Power Handling: 60 Watts RMS/120 Watts Max•
Impedance: 4 Ohms•
Frequency Response: 62-22kHz•
Rubber Boot Magnet Cover•
Mounting Depth: 1.97’’•
Includes Grills, Wires and Installation Hardware•
vx series speakers
To Next Page
