MNX250 1000 Watt 2 Channel Mini Mosfet Amplifier
2 x 40W RMS @ 4 OHMS •
2 x 80W Max @ 4 OHMS •
2 x 500W Max @ 4 OHMS Bridged •
2 x 140W RMS @ 2 OHMS •
Electronic Crossover Network •
Bass Boost Circuit •
Bridgeable at 4 Ohms •
2 Ohm Stereo Stable •
Gold RCA Inputs •
Line Outs for Left and Right Channel •
Low Pass Filter Controls •
High Pass Filter Controls •
Power and Protection LED Indicators •
Soft Turn-on/Turn-off •
THD: S/N Ratio: >90dB •
Channel Separation: >65dB •
Freq. Response: 20Hz~40KHz •
HPF Freq. Response: 50-500Hz •
LPF Freq. Response: 50-500Hz •
Subwoofer Remote Level Control •
Fuse: 30A x 1•
Dimensions: 5.65’’(L) x 1.73’’(H) x 6.22’’(W)•
MNX450 1600 Watt 4 Channel Mini Mosfet Amplifier
4 x 35W RMS @ 4 OHMS •
4 x 70W Max @ 4 OHMS •
2 x 800W Max @ 4 OHMS Bridged •
4 x 110W RMS @ 2 OHMS •
Electronic Crossover Network •
Bass Boost Circuit •
Bridgeable at 4 Ohms •
2 Ohm Stereo Stable •
Gold RCA Inputs •
Line Outs for Left and Right Channel •
Low Pass Filter Controls •
High Pass Filter Controls •
Power and Protection LED Indicators •
Soft Turn-on/Turn-off •
THD: S/N Ratio: >90dB •
Channel Separation: >65dB •
Freq. Response: 20Hz~40KHz •
HPF Freq. Response: 50-500Hz •
LPF Freq. Response: 50-500Hz •
Subwoofer Remote Level Control •
Fuse: 30A x 1•
Dimensions: 7.22’’(L) x 1.73’’(H) x 6.22’’(W)•
HTG237 1000 Watt 2 Channel Mosfet Amplifier
2 x 60W RMS @ 4 OHMS •
2 x 120W Max @ 4 OHMS •
2 x 500W Max @ 4 OHMS Bridged •
2 x 90W RMS @ 2 OHMS •
Electronic Crossover Network •
Bass Boost Circuit •
Bridgeable at 4 Ohms •
2 Ohm Stereo Stable •
Gold RCA Inputs •
Line Outs for Left and Right Channel •
Low Pass Filter Controls •
High Pass Filter Controls •
Power and Protection LED Indicators •
Soft Turn-on/Turn-off •
THD: S/N Ratio: >90dB •
Channel Separation: >65dB •
Freq. Response: 10Hz~45KHz •
HPF Freq. Response: 80KHz •
LPF Freq. Response: 50Hz-250Hz •
Subwoofer Remote Level Control •
Fuse: 25A x 1•
Dimensions: 9.84’’(L) x 2.24’’(H) x 8.81’’(W)•
HTG257 2000 Watt 2 Channel Mosfet Amplifier
2 x 100W RMS @ 4 OHMS •
2 x 200W Max @ 4 OHMS •
2 x 1000W Max @ 4 OHMS Bridged •
2 x 150W RMS @ 2 OHMS •
Electronic Crossover Network •
Bass Boost Circuit •
Bridgeable at 4 Ohms •
2 Ohm Stereo Stable •
Gold RCA Inputs •
Line Outs for Left and Right Channel •
Low Pass Filter Controls •
High Pass Filter Controls •
Power and Protection LED Indicators •
Soft Turn-on/Turn-off •
THD: S/N Ratio: >90dB •
Channel Separation: >65dB •
Freq. Response: 10Hz~45KHz •
HPF Freq. Response: 80KHz •
LPF Freq. Response: 50Hz-250Hz •
Subwoofer Remote Level Control •
Fuse: 40A x 1•
Dimensions: 12.99’’(L) x 2.24’’(H) x 8.81’’(W)•
heritage series amplifiers
To Next Page
