Lanzar VBP251 - Subwoofers

30
HRWDC10 Heritage 10’’ 1400 Watt Dual 4 Ohm Die-Cast Aluminum Subwoofer
Die-Cast Aluminum Basket with CNC Cutting •
Fiber Glass Chrome Plated Paper Cone •
Non-Fatiguing Butyl Rubber Surround •
2’’ High Temperature BAEISV Voice Coil •
80 Oz + 80 Oz High Density Barium •
Ferrite Magnet
Power Handling: 700 Watts RMS / •
1400 Watts Peak
Frequency Response: 27-1.2KHz •
Dual Voice Coil •
Impedance(Per Coil): 4 Ohms •
Efciency: 86dB •
Chrome Plated Back Plate •
Includes Installation Template•
HRWDC12 Heritage 12’’ 2000 Watt Dual 4 Ohm Die-Cast Aluminum Subwoofer
Die-Cast Aluminum Basket with CNC Cutting •
Fiber Glass Chrome Plated Paper Cone •
Non-Fatiguing Butyl Rubber Surround •
2.5’’ High Temperature BAEISV Voice Coil •
100 Oz + 100 Oz High Density Barium •
Ferrite Magnet
Power Handling: 1000 Watts RMS / •
2000 Watts Peak
Frequency Response: 24-1KHz •
Dual Voice Coil •
Impedance(Per Coil): 4 Ohms •
Efciency: 87dB •
Chrome Plated Back Plate •
Includes Installation Template•
HRWDC15 Heritage 15’’ 2400 Watt Dual 4 Ohm Die-Cast Aluminum Subwoofer
Die-Cast Aluminum Basket with CNC Cutting •
Fiber Glass Chrome Plated Paper Cone •
Non-Fatiguing Butyl Rubber Surround •
2.5’’ High Temperature BAEISV Voice Coil •
120 Oz + 120 Oz High Density Barium •
Ferrite Magnet
Power Handling: 1200 Watts RMS / •
2400 Watts Peak
Frequency Response: 20-900Hz •
Dual Voice Coil •
Impedance(Per Coil): 4 Ohms •
Efciency: 88dB •
Chrome Plated Back Plate •
Includes Installation Template•
HTG2100D 2400 Watt Class D Digital Mosfet Amplifier
1 x 350W RMS @ 4 OHMS •
1 x 550W RMS @ 2 OHMS •
1 x 800W RMS @ 1 OHMS •
1 x 2000W Max @ 1 OHMS •
Electronic Crossover Network •
Bass Boost Circuit •
Bridgeable at 4 Ohms •
2 Ohm Stereo Stable •
Gold RCA Inputs •
Line Outs for Left and Right Channel •
Low Pass Filter Controls •
Power and Protection LED Indicators •
Soft Turn-on/Turn-off •
THD: S/N Ratio: >90dB •
Channel Separation: >65dB •
Freq. Response: 10Hz~45KHz •
HPF Freq. Response: 80KHz •
LPF Freq. Response: 50Hz-250Hz •
Subwoofer Remote Level Control •
Fuse: 40A x 2•
Dimensions: 14.96’’(L) x 2.24’’(H) x 8.81’’(W)•
HTG447 2000 Watt 2 Channel Mosfet Amplifier
4 x 60W RMS @ 4 OHMS •
4 x 120W Max @ 4 OHMS •
2 x 1000W Max @ 4 OHMS Bridged •
4 x 180W RMS @ 2 OHMS •
Electronic Crossover Network •
Bass Boost Circuit •
Bridgeable at 4 Ohms •
2 Ohm Stereo Stable •
Gold RCA Inputs •
Line Outs for Left and Right Channel •
Low Pass Filter Controls •
High Pass Filter Controls •
Power and Protection LED Indicators •
Soft Turn-on/Turn-off •
THD: S/N Ratio: >90dB •
Channel Separation: >65dB •
Freq. Response: 10Hz-45KHz •
HPF Freq. Response: 80KHz •
LPF Freq. Response: 50Hz-250Hz •
Subwoofer Remote Level Control •
Fuse: 20A x 2•
Dimensions: 14.96’’(L) x 2.24’’(H) x 8.81’’(W)•
heritage series subwoofers
Lanzarcopy.indd 30 11/24/2009 7:10:27 PM