VCW10D Vector 10’’ Dual 4 Ohm Shallow Subwoofer
10” High Quality Polymica Cone •
Butyl Rubber Surround •
Dual 2” High Temperature Kapton Voice Coil •
80 Oz Magnet Structure •
Rubber Magnet Cover •
Power Handling:250 Watts RMS/ 500 Watts Peak •
Frequency Response: 32Hz-2.5KHz •
Impedance (Per Coil): 4 Ohm •
Efciency: 90dB •
Includes Installation Template •
Mounting Depth: 3.25”•
VCW12D Vector 12” Dual 4 Ohm Shallow Subwoofer
12’’ High Quality Polymica Cone •
Butyl Rubber Surround •
Dual 2’’ High Temperature Kapton Voice Coil •
80 Oz Magnet Structure •
Rubber Magnet Cover •
Power Handling: 300Watts RMS/ 600 Watts Peak •
Frequency Response: 28Hz-2.2KHZ •
Impedance (Per Coil): 4 OHM •
Efciency: 91dB •
Includes Installation Template •
Mounting Depth: 3.75”•
VCT1500D 1500 WATTS Class D Amplifier
700W x 1 Output at 4 Ohms•
1000W x 1 Output at 2 Ohms•
1500W x 1 Output at 1 Ohm•
1 Ohm Stable•
MOSFET Power Supply•
Variable Subsoniclter : 15 Hz-40 Hz•
Variable Low-Pass:50 Hz-150 Hz•
Variable Input Level (Gain) Control : •
6V-200mV/2V-8V
Variable Bass Boost: 0-18dB•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-150 Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x30 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x1.78’’H x 12.13’’L•
VCT3000D 3000 WATTS Class D Amplifier
1000W x 1 Output at 4 Ohms•
2000W x 1 Output at 2 Ohms•
3000W x 1 Output at 1 Ohm•
1 Ohm Stable•
MOSFET Power Supply•
Variable Subsoniclter : 15 Hz-40 Hz•
Variable Low-Pass:50 Hz-150 Hz•
Variable Input Level (Gain) Control : •
6V-200mV/2V-8V
Variable Bass Boost: 0-18dB•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input:10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-150 Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x50 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x 1.78’’H x 14.17’’L•
VCT4110 2000 WATTS 4 Channel High Power MOSFET Amplifier
500W x 4 Output at 4 Ohms•
1000W x 2 Bridged Output at 2 Ohms•
2 Ohm Stable•
MOSFET Power Supply•
Variable Hi-Pass:40 Hz-250 Hz•
Variable Low-Pass : 40 Hz-250 Hz•
Variable Input Level (Gain) Control : 6V-200mV•
Bass Boost Switch:0-18dB•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-30K Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x30 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x1.78’’H x 14.02’’L•
vector series slim subwoofers