Lanzar VBP251 - VCT2210 2000 Watts 2 channel High Power Mosfet amplifier; VCT2310 3000 Watts 2 Channel High power mosfet amplifier; VCT211 4000 WATts 2 Channel High Power mosfet amplifier; VCT251 D 5000 WATtts 2 Channel High Power mosfet amPLIFIER

49
VCT2210 2000 WATTS 2 Channel High Power MOSFET Amplifier
1000W x 2 Output @ 2 Ohms•
2000W x 1 Bridged Output @ 4 Ohms•
2 Ohm Stable•
MOSFET Power Supply•
Variable Hi-Pass : 40 Hz-250 Hz•
Variable Low-Pass:40 Hz-250 Hz•
Variable Input Level (Gain) Control : 6V-200mV•
Bass Boost Selector : 0/+18dB•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-30K Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x40 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x1.75’’H x 12’’L•
VCT2310 3000 WATTS 2 Channel High Power MOSFET Amplifier
1500W x 2 Output @ 2 Ohms•
3000W x 1 Bridged Output @ 4 Ohms•
2 Ohm Stable•
MOSFET Power Supply•
Variable Hi-Pass:40 Hz-250 Hz•
Variable Low-Pass : 40 Hz-250 Hz•
Variable Input Level (Gain) Control : 6V-200mV•
Variable Bass Boost:0~+18dB•
Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave•
Sub Sonic Switch•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-30K Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x50 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x1.75’’H x 15’’L•
VCT2510 5000 WATTS 2 Channel High Power MOSFET Amplifier
2500W x 2 Output @ 2 Ohms•
5000W x 1 Bridged Output @ 4 Ohms•
2 Ohm Stable•
MOSFET Power Supply•
Variable Hi-Pass : 40 Hz-250 Hz•
Variable Low-Pass : 40 Hz-250 Hz•
Variable Input Level (Gain) Control : 6V-200mV•
Variable Bass Boost : 0~+18dB•
Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave•
Sub Sonic Switch•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-30K Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x60 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x1.75’’H x 21’’L•
VCT2610 6000 WATTS 2 Channel High Power MOSFET Amplifier
3000W x 2 Output at 4 Ohms•
6000W x 1 Bridged Output at 2 Ohms•
2 Ohm Stable•
MOSFET Power Supply•
Variable Hi-Pass : 40 Hz-250 Hz•
Variable Low-Pass : 40 Hz-250 Hz•
Variable Input Level (Gain) Control : 6V-200mV•
Variable Bass Boost : 0-18dB•
Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave•
Sub Sonic Switch•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-30K Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x60 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x1.78’’H x 21.97’’L•
VCT2410 4000 Watts 2 Channel High Power MOSFET Amplifier
2000W x 2 Output @ 2 Ohms•
4000W x 1 Bridged Output @ 4 Ohms•
2 Ohm Stable•
MOSFET Power Supply•
Variable Hi-Pass : 40 Hz-250 Hz•
Variable Low-Pass : 40 Hz-250 Hz•
Variable Input Level (Gain) Control : 6V-200mV•
Variable Bass Boost : 0~+18dB•
Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave•
Sub Sonic Switch•
Thermal / Overload / Short Circuit Protection•
Soft Turn On/Off•
Power & Protection LED Indicator•
Low Level RCA Input : 10K Ohms•
Line Level RCA Output•
Frequency Response : 15 Hz-30K Hz•
Signal to Noise Ratio: >95dB•
THD:0.1 %•
2x60 Amp Maxi Type Fuse•
Slim Size Amplier Design For Easy Installation•
Dimensions: 10.63’’W x 1.75’’H x 17’’L•
vector series amplifiers
Lanzarcopy.indd 49 11/24/2009 7:14:20 PM