Lanzar VBP251 - Speakers

31
HR4.2 Heritage 4’’ Two-Way Coaxial Speakers
Standard 4.0’’ Size ts many OEM Cut-outs •
Special Chromed Mica-Poly Composite Cone •
Non-Fatiguing Butyl Rubber Surround •
1’’ High Temperature Voice Coil •
High Density Barium Ferrite Magnet •
25 Oz Magnet Structure •
0.75’’ Silk-Neo Dome Tweeter •
Rubber Magnet Boot •
Power Handling: 60 Watts RMS /120 Watts Peak •
Frequency Response: 90-20KHz •
Impedance: 4 Ohms •
Mounting Depth: 2.15’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
HR5.1 Heritage 5.25’’ Two-Way Custom Component Speaker System
This Custom Kit Contains:•
5.25’’ Midrange Driver •
Chromed Mica-Poly Cone •
Butyl Rubber Surround •
120 Watts RMS/ 240 Watts Peak •
Frequency Response: 80-8KHz •
Impedance: 4 Ohms•
One Pair Tweeter: •
1’’ Silk Dome Tweeter •
Neodymium Magnet •
3 Mounting Options: Flush / Swivel / Surface or •
Angle Mount
Frequency Response: 1.4-24KHz •
Impedance: 4 Ohms•
One Pair Passive Crossover Network•
Two-Way Passive Crossovers •
12dB Octave Slope •
Gold Plated Connectors •
Fully-Protected Circuitry•
Accessories:•
Custom Grills •
Mounting Hardware •
Wiring Kit w/Diagram & Template•
HR5.2 Heritage 5.25’’ Two-Way Coaxial Speakers
Standard 5.25’’ Size ts OEM Cut-outs •
Special Chromed Mica-Poly Composite Cone •
Non-Fatiguing Butyl Rubber Surround •
1’’ High Temperature Voice Coil •
High Density Barium Ferrite Magnet •
30 Oz Magnet Structure •
1’’ Silk-Neo Dome Tweeter •
Rubber Magnet Boot •
Power Handling: 120 Watts RMS /240 Watts Peak •
Frequency Response: 75-20KHz •
Impedance: 4 Ohms •
Mounting Depth: 2.4’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
HR6.1 Heritage 6.5’’ Two-Way Custom Component Speaker System
6.5’’ Midrange Driver•
Chromed Mica-Poly Cone •
Butyl Rubber Surround •
140 Watts RMS/ 280 Watts Peak •
Frequency Response: 55-6KHz •
Impedance: 4 Ohms•
One Pair Tweeter:•
1’’ Silk Dome Tweeter •
Neodymium Magnet •
3 Mounting Options: Flush / Swivel / Surface or •
Angle Mount
Frequency Response: 1.4-24KHz •
Impedance: 4 Ohms•
One Pair Passive Crossover Network:•
Two - Way Passive Crossovers •
12dB Octave Slope •
Gold Plated Connectors •
Fully-Protected Circuitry•
Accessories:•
Custom Grills •
Mounting Hardware •
Wiring Kit w/Diagram & Template•
HR6.2 Heritage 6.5’’ Two-Way Coaxial Speakers
Standard 6.5’’ Size ts OEM Cut-outs •
Special Chromed Mica-Poly Composite Cone •
Non-Fatiguing Butyl Rubber Surround •
1’’ High Temperature Voice Coil •
High Density Barium Ferrite Magnet •
40 Oz Magnet Structure •
1’’ Silk-Neo Dome Tweeter •
Rubber Magnet Boot •
Power Handling: 140 Watts RMS /280 Watts Peak •
Frequency Response: 55-20KHz •
Impedance: 4 Ohms •
Mounting Depth: 2.6’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
HR69.3 Heritage 6’’x 9’’ Three-Way Triaxial Speakers
Standard 6’’x9’’ Size ts OEM Cut-outs •
Special Chromed Mica-Poly Composite Cone •
Non-Fatiguing Butyl Rubber Surround •
1.25’’ High Temperature Voice Coil •
High Density Barium Ferrite Magnet •
80 Oz Magnet Structure •
1’’ Silk-Neo Dome Midrange •
0.75’’ Silk-Neo Dome Tweeter •
Rubber Magnet Boot •
Power Handling: 200 Watts RMS / 400 Watts Peak •
Frequency Response: 45-25KHz •
Impedance: 4 Ohms •
Mounting Depth: 3.45’’ •
Includes Custom Wire-Mesh Grills, Wires and •
Installation Hardware
heritage series speakers
Lanzarcopy.indd 31 11/24/2009 7:10:39 PM