VX6C VX 6.5’’ Two-Way Custom Component System
6.5’’ Midbass Driver •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Power Handling: 120 Watts RMS/240 Watts Peak •
Frequency Response: 50-22kHz •
Impedance:4 Ohms•
One Pair Tweeter:•
.5’’ Mylar Dome Tweeter •
Neodymium Magnet •
Tri-Way Mounting System: Flush, Swivel, •
Surface Mount
Frequency Response: 1.3k-22k Hz •
Impedance: 4 Ohms•
One Pair Passive Crossover Network:•
Two-Way Passive Crossovers •
12 dB Octave Slope •
Silver Plated Connectors •
Fully Protected Circuitry With dB Switch •
Includes Grills, Wires, Diagram, Template and •
Installation Hardware
VX50S VX 5.25’’ Two-Way Slim Mount Speaker System
Concealed Neodymium Magnet •
Standard 5.25’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Neodymium Dome Tweeter •
Power Handling: 60 Watts RMS/120 Watts Max •
Impedance: 4 Ohms •
Frequency Response: 55-20kHz •
Mounting Depth: 1.25’’ •
Includes Grills, Wires and Installation Hardware•
VX60S VX 6.5’’ Two-Way Slim Mount Speaker System
Concealed Neodymium Magnet •
Standard 6.5’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Neodymium Dome Tweeter •
Power Handling: 90 Watts RMS/180 Watts Max •
Impedance: 4 Ohms •
Frequency Response: 50-20kHz •
Mounting Depth: 1.45’’ •
Includes Grills, Wires and Installation Hardware•
VX104S VX 4’’x 10’’ Two-Way Slim Mount Speaker System
Slim Mounting Neodymium Magnet •
Standard 4’’ x 10’’ Size Fits OEM Locations •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Neodymium Dome Tweeter •
Power Handling: 90 Watts RMS/180 Watts Max •
Impedance: 4 Ohms •
Frequency Response: 55-22kHz •
Mounting Depth: 1.5’’ •
Includes Grills, Wires and Installation Hardware•
VX5C VX 5.25’’ Two-Way Custom Component System
This Custom Kit Contains:•
One Pair 5.25’’ Midbass•
5.25’’ Midbass Driver •
Poly-Mica Coated Woofer Cone •
1’’ High Temperature Voice Coil •
Power Handling: 100 Watts RMS/200 Watts Peak •
Impedance: 4 Ohms•
One Pair Tweeter:•
.5’’ Mylar Dome Tweeter •
Neodymium Magnet •
Tri-Way Mounting System: Flush, Swivel, •
Surface Mount
Frequency Response: 1.3k-22k Hz •
Impedance: 4 Ohms•
One Pair Passive Crossover Network:•
Two-Way Passive Crossovers •
12 dB Octave Slope •
Silver Plated Connectors •
Fully Protected Circuitry With dB Switch •
Includes Grills, Wires, Diagram, Template and •
Installation Hardware
vx series speakers
To Next Page
