Lars Thrane Iridium Certus LT-4100 User Manual

LT-4100 User & Installation Manual Rev 1.00 Web server
Lars Thrane A/S www.thrane.eu Page 95 of 129
Remote management
After enabling Remote management from the LT-4110 Control Unit GUI, test the connection by visiting the
Public URL of the terminal (e.g. https://203.0.113.1) from a device having a public IP address configured for
remote access in Iridium’s firewall and verify the login page of the LT-4100 terminal as shown on Figure
118.
NOTE: As the upload speed of a Certus 100 terminal is low compared to normal internet
connections, accessing the web management interface of the LT-4100 via the satellite
connection may require some patience compared to normal web browsing experience.
WARNING: If the default password for the admin user has not been changed it is highly recommended
that it is changed before enabling Remote Management.
When accessing the LT-4100 web interface via remote management, web pages that normally
automatically refresh when connected to the terminal via LAN will instead provide a ‘Refresh page’ button
at the top of the webpage to prevent excessive IP data usage. This is illustrated on Figure 119.
Figure 118: Web server – Remote management
Figure 119: Web server - Remote management

Lars Thrane Iridium Certus LT-4100 Specifications

General

Brand	Lars Thrane
Model	Iridium Certus LT-4100
Category	Conference System
Language	English