LT-4100 User & Installation Manual Rev 1.00 Web server
Lars Thrane A/S www.thrane.eu Page 97 of 129
IP Data
In addition to configuring outgoing Data activation on the LT-4110 Control Unit as described in System
Submenus, Settings it is also possible to control whether Always On or Manual Start/Stop is used on the LT-
4100 System Web interface. There is no difference whether this is managed on the LT-4110 Control Unit or
on the web interface. The process is shown on Figure 121, where Mode can be set to ‘Always On’ or
‘Manual Start/Stop’.