Lars Thrane Iridium Certus LT-4100 User Manual

LT-4100 User & Installation Manual Rev 1.00 System Services
Lars Thrane A/S www.thrane.eu Page 60 of 129
The user can now either press ‘Pair’ to pair with the device or ‘Reject’ to reject pairing with the device. The
‘Pair’ softkey is pressed and the device (in this case an iPhone) is connected. The LT-4110 will now display
the Bluetooth symbol as displayed on Figure 57.
The connected device (in this case the iPhone) will now be displayed under ‘Known Devices’ at the bottom
of the Bluetooth submenu, this is displayed on Figure 58.
To disconnect the device from the LT-4100 the user can either disable Bluetooth on the LT-4110 Control
Unit or the paired device or press the ‘Forget’ softkey. Using the ‘Forget’ softkey will remove the device
from the list as seen on Figure 59.
Figure 56: Bluetooth (How to pair) 2/5
Figure 57: Bluetooth (How to pair) 3/5
Figure 58: Bluetooth (How to pair) 4/5
Bluetooth pairing
request, press ‘Pair’ to
pair
Bluetooth is enabled and
a device is connected
The connected device is
shown under ‘Known
Devices’. Press ‘Forget’ to
remove the device

Lars Thrane Iridium Certus LT-4100 Specifications

General

Brand	Lars Thrane
Model	Iridium Certus LT-4100
Category	Conference System
Language	English