Larsen & Brusgaard PROTRACK II - 11.2 Change between warning Memory Banks; 11.3 Setting the Warning Altitudes; 11.4 Four Warning Alarms

38 39
11.2 Change between warning Memory Banks
When the warning bank value is flashing, press
or to select warning bank -01
to -04.
11.3 Setting the Warning Altitudes
The setting of altitudes in each warning bank can be performed either on the ground
or in the airplane during climb to jump altitude.
11.4 Four Warning Alarms
Press until 1
st
warning altitude flashes
Press or to change the 1
st
warning altitude