EasyManua.ls Logo

Larsen & Brusgaard PROTRACK II - Landing Zone elevation differs from that of the airport

Larsen & Brusgaard PROTRACK II
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102 103
26 - Air Filter
The PROTRACK II is water resistant against minor splashes of water.
The air filter is the white circular part mounted on the back of the unit below the
battery cover. If it becomes wet, let the PROTRACK II dry in a warm place for 48 hours.
NOTE: The air filter must be replaced if jumping is resumed quickly or if the
PROTRACK II has been submerged into water.
27 - Troubleshooting
When the PROTRACK II detects a fault, an error (“Error”) sign, number and code are displayed.
All faults indicate that the PROTRACK II is defective.
Remedy: Replace batteries or press reset.
If the unit does not function correctly even after replacing batteries and pressing
reset, please contact your local dealer or LB ALTIMETERS.

Table of Contents

Related product manuals