100 101
24 - Resetting the PROTRACK II
Press a paperclip into the tiny hole on the left side of the battery cover and release.
The unit restarts.
NOTE: Reset the unit after battery replacement or when troubleshooting.
25 - Battery Replacement
NOTE: Reset the PROTRACK II after replacing batteries.
Customer settings are kept in non-volatile memory when removing batteries.
However, the built-in clock must be set to the correct time.
Carefully remove screws from battery cover and
remove batteries.
Install new batteries and note polarity.
Use only Renata CR-2325.
To Next Page
Loading...
Need help?
General
