Laser Technology UltraLyte LR B User Manual

Section #4 – Instrument Tests 39
Electronic Copy of LTI's UltraLyte LR B User's Manual - 2
nd
Edition © 2002
Feet
Meters
Figure 27. Fixed Distance Test
Refer to the instructions below and Figure 30 above to do the Fixed
Distance Test.
1. Stand on the shooting mark.
2. Ensure the UltraLyte LR B is powered ON and that the Speed
Mode is active.
3. Aim at the target.
4. Press the TRIGGER.
5. Check the display. The speed reading should be zero. A
reading of zero verifies the timing accuracy of the instrument
and is identical in nature to an accurate velocity reading of a
vehicle moving at any speed.
•
MPH results: The displayed distance should read from
174.5 to 175.5 feet if your
fixed distance was 175 feet.
• KmH results: The displayed distance should read from
59.8 to 60.2 meters if your
fixed distance was 60 meters.
If you need assistance, contact Laser Technology, Inc.
See the inside front cover for LTI contact information.
175 feet
For absolute accuracy, the instrument
should be directly over the shooting mark.
For absolute accuracy, the instrument
should be directly over the shooting mark.
60 meters
B
A

Laser Technology UltraLyte LR B Specifications

General

Brand	Laser Technology
Model	UltraLyte LR B
Category	Measuring Instruments
Language	English