Laser Technology UltraLyte LR B User Manual

Section #1 – Getting Started 14
Electronic Copy of LTI's UltraLyte LR B User's Manual - 2
nd
Edition © 2002
Powering ON the UltraLyte LR B
To power ON the UltraLyte LR B:
1. Press the TRIGGER. Briefly, the screen display should look
like Figure 9 below, and then the display will change to the
Speed Measurement Screen. See Figure 15 on page 23.
Powering OFF the UltraLyte LR B
To power OFF the UltraLyte LR B:
1. Press and hold the POWER OFF button for approximately
2.5 seconds.
To help save its batteries, the UltraLyte LR B has a
factory-defined power OFF interval. The instrument will
automatically power OFF if there is no activity for a period
of 15 minutes. Instrument activity includes any button
presses or serial communication.
Extending the Display Segment Test
Extending the Display Segment Test lets you confirm that all display
indicators are working. Refer to the instructions below to extend the
display segment test.
1. Verify that the UltraLyte LR B is powered OFF.
2. Press and hold the TRIGGER.
3. Refer to Figure 9 (above) to ensure that all of the display
segments are showing on your UltraLyte LR B.
4. Release the TRIGGER. Upon release of the TRIGGER, the
display will change to the Speed Measurement Screen. See
Figure 15 on page 23.
If you need assistance, contact Laser Technology, Inc.
See the inside front cover for LTI contact information.
Figure 9. LCD Display Segments
MENU
LASER
BATT
MPH
KmH
CmS
SPEED
SURVEY
JAM
GSL
TOD
CONT
FMS
DGV
TEST
DBC
DELTA
MUTE

Laser Technology UltraLyte LR B Specifications

General

Brand	Laser Technology
Model	UltraLyte LR B
Category	Measuring Instruments
Language	English