Laser Technology UltraLyte LR B User Manual

Section #1 – Getting Started 20
Electronic Copy of LTI's UltraLyte LR B User's Manual - 2
nd
Edition © 2002
Restoring the Factory Defaults
The UltraLyte LR B has one user-selectable option — the in-scope
aiming dot's intensity. Although, you may never need to, you can
restore the instrument's factory default settings. Refer to the
instructions and Figures 12 and 13 below to restore the factory
default for the in-scope aiming dot’s intensity.
1. Verify that the UltraLyte LR B is powered OFF.
2. Press and hold the TRIGGER.
3. Press and hold the BACKLIGHT button.
The display should look like Figure 12.
4. Continue to hold the TRIGGER and the BACKLIGHT button
until the CLEAr indicator is displayed as Figure 13 shows.
5. Release the TRIGGER and the BACKLIGHT button.
The display will change to the Speed Measurement Screen,
see Figure 15 on page 23.
Figure 12. Restoring the Factory Defaults
Figure 13. Factory Defaults Restored

Laser Technology UltraLyte LR B Specifications

General

Brand	Laser Technology
Model	UltraLyte LR B
Category	Measuring Instruments
Language	English