Other failures
•
The unit does not operate.
Check whether AC adapter is properly in an AC outlet.
•
The unit does not print.
Check whether the ribbon cassette is installed in place.
•
Print is not located in the right place.
Check whether setting of the pay period ending date is set correctly.
Check whether the day advance time is set correctly.
Make sure that no part of time card is folded, and that time card is inserted straight into the
unit.
If improper printing still remains after checking above points, contact the store from
whom you bought the unit.
•
"99 99" appears when you try to enter the setting mode.
Password is required. Input the correct password you've set. (4-digit numbers)
Refer to "Setting / Changing Password" in this manual.
Environmental Conditions
Avoid placing the unit in environments that are:
• humid or dusty
• exposed to direct sunshine
• subject to frequent or continuous vibrations
• outside the temperature range between -5˚ and 45˚ C (+23˚F and +113˚F)
• affected by chemicals or ozone
31
To Next Page
Loading...
