Lauda Ecoline E 215 T - Parameters; Setting the Proportional Band of the PID-Controller

Starting up
15.05.01
YAEE0013
27
6.4.3 Parameters
and 2x
− Directly from level 0 (setpoint selection) press the key
combination on the left, or
− forward with the key from setpoint resolution function.
− Here it is possible to switch over to level 2. Press the key
on the left, continue with Section 6.4.3.1. or
− with key to step END.
− End of the menu.
− Return to level 0 (setpoint selection) with the key on the
left, or
− with key back to "Setting the setpoint resolution".
6.4.3.1 Setting the proportional band of the PID-controller
and 2x
− Directly from level 0 (setpoint selection), press the key
combination on the left, until the PARA -function is
reached, then
− switch to level 2 from PARA (see above) with key on the
left.
or
− Within this level it is possible to scroll with the keys.