Starting up
36
6.5.5 Other error messages
− E 0 etc. is flashing in the bottom line.
!
various temperature probe faults.
!
pump fault, proceed as in Section 6.5.3.
☞
− If the fault report is repeated ! pull out the mains plug and try whether the motor
can be rotated by the fan blade inserting a screwdriver into the ventilation opening
at the back of the unit.
− Error code 0 ...255
!
microprocessor error.
− Error code 1000...1255
!
slave processor error.
− Indication can be used for remote diagnosis.
− After rectifying the fault, reset with the key.
To Next Page
Loading...
