To Next PageTo Next Page
Need help?Do you have a question about the Lauda Ecoline RE 206 and is the answer not in the manual?
General| Weight | 28 kg |
|---|---|
| Temperature Range | -20°C to 200°C |
| Heating Power | 2000 W |
| Cooling Power | 0.2 kW |
| Cooling output at 20°C | 0.2 kW |
| Pump Pressure | 400 mbar |
| Pump Capacity | 20 l/min |
| Power Supply | 230V; 50Hz |
| Dimensions | 400 x 500 x 400 mm |
Describes the nomenclature for different thermostat models.
Details the pump's features, capabilities, and adjustments.
Explains the display, control elements, and safety circuit functions.
Details the programming functionality for specific models.
Describes the materials used in the unit's construction.
Describes the operation and components of the cooling system.
Provides technical specifications and testing procedures for serial interfaces.
General operational details for serial communication.
Lists commands for controlling the unit via serial interface.
Commands to retrieve data from the thermostat.
Explains error codes and provides troubleshooting guidance.
Instructions for physically setting up and positioning the unit.
Procedures for adding and draining the bath liquid.
Information on suitable bath liquids and connection hoses.
Guidance on connecting external devices for circulation.
Steps for connecting the unit to the power supply.
Procedure for powering the unit on and initial checks.
How to set the desired temperature setpoint.
Configuration options for the refrigeration system.
Setting the pump speed and output flow rate.
Adjusting the precision of the temperature display.
Illustrates a sample temperature program for the programmer.
Steps for viewing and modifying program segments.
Procedure to initiate and run a temperature program.
Choosing the communication interface (RS 232 or RS 485).
How to set up and test the overtemperature safety feature.
Adjusting the PID controller's proportional band parameter.
Adjusting the PID controller's reset time parameter.
Configuring serial communication speed and transfer rate.
Procedure for calibrating the unit's temperature measurement.
Testing and understanding the safety feature for low liquid levels.
Information on pump motor overload and blockage detection.
Explanation and troubleshooting for various error codes.
General safety guidelines for unit operation.
Additional safety precautions and warnings.
Instructions for cleaning the unit's exterior and interior.
Specific maintenance procedures for the refrigeration system.
Information regarding unit repair and environmentally sound disposal.
Guidelines for ordering replacement parts.
