LAUNCH X-431 PRO (DBSCar V) User Manual
15
In Fig. 4-3, fill in the information in each field (Items with * must be filled). After
inputting, tap “Register”, a screen similar to the following will appear:
Fig. 4-4
In Fig. 4-4, input the Serial Number and Activation Code, which can be found in
the password envelope.
Fig. 4-5
Note: To exit and activate it later, tap “Skip”. In this case, you can activate your
connector by tapping “Activate Connector” in “Personal Center”. For details, please
refer to Chapter 9.4.
Tap “Activate” to finish your registration. See Fig. 4-6.
Product SN
Activation code
To Next Page
Loading...
