58 Check-Out
Checking Hydraulic Tank Fluid Level
To check the hydraulic tank fluid level, do the following:
1. Make sure the tailgate is down and clamped securely.
2. Position the packer and carrier panels to the “INTERRUPTED CYCLE” position.
3. Pull the pushout lever to position the pushout cylinder in the retract position.
The fluid level should be between the safe range marks on the sight gauge.
If not:
4. Add hydraulic fluid for normal operating and weather conditions.
See Hydraulic System Service on page 47 for additional information about servicing the hydraulic
tank.
Checking Engine Speed Up Switch
Check engine speed up switch.
OPERATIONAL STATUS
Truck Off PTO Disengaged
OPERATIONAL STATUS
Truck Running PTO Engaged Speed Up On Transmission Neutral
To Next Page
Loading...