BT/S Variable-Speed Peristaltic Pump
2. Check the wire connection between
the motor and the driver board.
3. Check the wire connection between
the driver and the main board.
4. Check the power voltage for the
pump.
3 Hardware Motor is
trembling
1. Check the wire connection between
the motor and the driver board.
2. The motor is overloaded. Check the
mechanical connection.
4 Hardware Motor only
runs in one
direction
Check the connection between the
drive board and the main control
board.
5 Hardware Keypad
does not
work
1. Check the wire connection between
keypad and the main board.
2. Check if the key is broken.
6 Hardware External
control does
not work
1. Check the wiring of the connector.
2. Check if the external control power
voltage is provided.
3. Check the connections of the
external control board.
7 Hardware RS485 com
does not
work
1. Check the wiring of the connector.
2. Check if the external control power
voltage is provided.
3. Check the connections of the
communication board.
8 Hardware Noisy when
running
Check the screws and level on pump
head to make sure they are secure.
9 Software External
control does
Check if pump is on External Control
Mode.
23 Tel：0312-3250677 3250877 3250977 Fax：0312-3250877-804
To Next Page
Loading...
