Three Ways to Connect Your Baby Unit - LF925HD |
LF925HD-2
How the system works?
Direct mode
The Parent Unit and the Baby Unit of your video monitor connect to each other in
Direct mode by default, which allows you to stream live video right out of the box.
Direct mode connection lets you stream live video from the Parent Unit only.
You may experience reduced signal strength if your Parent Unit and Baby Unit are far apart, or there are obstructing
factors, such as internal walls, between them. Move the Parent Unit closer to the Baby Unit to improve the signal
strength. You can also set up Router mode to connect the units via your home Wi-Fi network to improve the
connection between your Parent Unit and Baby Unit.
You can continue using your video monitor with Direct mode connection, or you can
set up your monitor in Router mode connection.
Router mode uses your home Wi-Fi network to connect your video monitor. It supports
live video streaming through the Parent Unit and smartphone app.
We recommend that you set up your monitor in Router mode to enjoy live video
streaming via your Parent Unit with an enhanced connection.
To Next Page
Loading...
