LeapFrog LF925HD - Wi-Fi Set-Up

Wi-Fi Set-up - LF925HD | LF925HD-2
On the Parent Unit
Set up Wi-Fi connection for the first time
1. Press MENU/SELECT to enter the main menu.
2. Press
or to select the General Settings Menu ,
press MENU/SELECT
.
3. Press MENU/SELECT
again to enter Configure Wi-Fi sub-menu.
4. If this is your first time to set up Wi-Fi connection with the units, a video, "How to set up
Wi-Fi connection", will be played. If you watched the video before but want to watch it
again, press
.
5. After watching the video, a list of names of Wi-Fi network is displayed, select your
desired Wi-Fi network.
6. Enter the Wi-Fi password, then press
or and MENU/SELECT to
select Done. It takes a while for the Baby Unit to connect to the Wi-Fi network.
7. Press MENU/SELECT
to select Done upon the successful Wi-Fi connection.
8. In addition, you can connect your Baby Unit to mobile device following the instructions
on the Parent Unit.
Notes:
Before setting up Wi-Fi connection, please make sure that:
Your Baby Unit(s) are powered on.
Your Parent Unit and Baby Units are placed close to each other.
Change Wi-Fi network
1. Press MENU/SELECT
to enter the main menu.
2. Press
or to select the General Settings Menu ,
press MENU/SELECT
twice.
26