Night Vision - LF925HD | LF925HD-2
Night Vision (B&W and Colour)
The Baby Unit has infrared LEDs that allow you to see your baby clearly at night or in a
dark room. When the Baby Unit being viewed detects low light levels, the infrared LEDs
switch on automatically. When Black-and-White Night Vision mode is activated,
appears on the screen. When Colour Night Vision mode is activated, appears
on the screen.
Night Vision
Mode
Description
B&W Night Vision
Suitable for extremely dark or low light environments.
Images will be in black-and-white.
Colour Night Vision
On the Parent Unit
Change your viewing mode
1. Press Night Mode quick set key
to view Night Mode Menu.
2. Press
or to select black-and-white viewing
or colour viewing
.
Notes:
• It is normal to see a short white glare on your Parent Unit screen as the Baby Unit adapts to the dark environment.
• If you adjust the night vision mode while night vision is not activated, the new settings will be saved and applied the next
time it activates.
Tip:
• The video quality may vary depending on the surrounding environment and interfering factors like lighting, objects,
colour and backgrounds. Adjust the Baby Unit angle or place the Baby Unit at a higher elevation to prevent glare and a
blurry display.
Suitable for low-light room conditions with night light as an
assisting light source.
Images will be in colour.
3. If select colour viewing , you can press to turn on the 30 seconds
temporary white light, and increase the light brightness at the same time.
Press to decrease the night light brightness until turn off the light.
To Next Page
Loading...
