Connect and Charge - LF925HD | LF925HD-2
Connect the Baby Unit
Notes:
The rechargeable battery in the Parent Unit is built-in.
Use only the power adapters supplied with this product.
Make sure the Parent Unit and the Baby Unit are not connected to the switch controlled electric outlets.
Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold
the weight of the Parent Unit and the Baby Unit, so do not connect them to any ceiling, under-the-table, or cabinet
outlets. Otherwise, the adapters may not properly connect to the outlets.
Make sure the Parent Unit, the Baby Unit and the power adapter cords are out of reach of children.
Charge the Parent Unit battery
When you connect and turn on the Parent Unit, the battery charges automatically.
Notes:
Before using the baby unit for the first time, charge the Parent Unit battery for 12 hours. When the Parent Unit battery
is fully charged, the battery icon becomes solid.
It takes longer to charge the battery when the Parent Unit is turned on. To shorten the charging time, turn the Parent
Unit off while charging.
The standby time varies depending on the Baby Unit sensitivity levels you set, your actual usage time and the age of
the battery.
To Next Page
Loading...
