LeCroy Waverunner2 LT374 Series User Manual

5-16 Performance Verification Rev. D
1) Connect the DMM and record the
voltage reading
in Table 6, column
DMM.
2) Press
Clear Sweeps
3) After 10 sweeps, read off the
DSO mean parameter
, and record the
measurement in Table 5, column
Mean
.
!
For each DC voltage applied to the DSO input, repeat parts 1), 2), 3) and 4).
!
Calculate the
Difference (
∆
∆∆
∆
)
by subtracting the
DMM voltage
reading from
the
DSO mean
voltage reading. Record the test result in Table 5, and compare
the
Difference (
∆
∆∆
∆
)
to the corresponding limit in the test record.
!
Repeat step 5.7 Procedure for the other channels, substituting channel controls
and input connector.

LeCroy Waverunner2 LT374 Series Specifications

General

Brand	LeCroy
Model	Waverunner2 LT374 Series
Category	Test Equipment
Language	English