When completing a My Home Legrand project, a careful
assessment of the following is of fundamental importance:
• Choose the functions;
• Analysis of the system to be completed, selecting between SCS
BUS and ZigBee
®
radio system integration;
• System layout.
Irrespective of the type of system and the required house
automation applications, it is necessary that the layout of the
house is made available to the installer. It is also important
that a check is carried out, to ensure that the initial project
requirements are in line with the actual site: number of rooms
and their use (living room, bedroom, bathroom etc.)
Project approach
On a design and installation point of view, the installation of a house automation system is not much different from that of a traditional
electric power system, particularly in terms of:
• The positioning of the electric distribution board;
• The positioning of the junction boxes;
• The positioning of wall boxes;
• The definition and positioning of loads and users.
• The layout of the ducts;
• The type of wiring;
• The coexistence of cables inside the same duct.
To Next Page
Loading...
