• Maximum distance between connections
In completing the system, take into account the maximum
length of the extended cable and the maximum distance
between the components.
• The maximum number of devices that can be connected
Depending on their total absorption and on the distances
between the connection point and the power supply.
• Functions of the devices
By configuring the devices, it will be possible to define their
function within the system.
When installing house automation systems, some specific elements must however also be considered:
The following pages will provide some suggestions and practical recommendations on the above points.
Pushbutton control – 1
load - special functions -
2 modules
Flush-mounted dimmer
actuator – 2 modules
Flush-mounted
1-relay actuator –
2 modules
To Next Page
Loading...
