• When connecting a DIN amplifier in flush mounting box, two
separate dedicated ducts must be installed.
Power cable
Sound
system Bus
When installing a Sound system, comply with the following
installation requirements:
Cavo energia
BUS
diffusione
sonora
Inside the home, cables must be installed inside protective ducts
made of insulating material, embedded in floor, walls or ceilings.
For boxes and cellars, due to the difficulty in embedding the
components inside the walls (concrete in boxes and often less than
10 cm wall thickness in cellars), it is preferable to leave ducts and
enclosures exposed. The path of the ducts must take into account
the possibility of containing cables connecting different systems.
For the installation of flush mounting components, corrugated
tubes of different colours should be used. This will make
installation and individuation of the system easier. It is
recommended that only ducts with a minimum diameter of 25 mm
are used.
Automation
Power supply
Temperature control
Power management
Burglar alarm
Telephone system
Data network
TV/SAT
Video handset system
Sound system
Data network
TV/SAT
Layout
of the ducts
To Next Page
Loading...
