When the Automation system devices are configured properly,
it is possible to manage the load as follows:
• Control for a single load (lamp, rolling shutter, etc.);
• Control for one or more load groups (for example, only the
shutters on the first floor, north side, etc.);
• Simultaneous management of all loads (for example,
general deactivation of all lamps in the house and/or
closing of all rolling shutters).
It is also possible to carry out special functions - which can
hardly be achieved with conventional electrical systems.
These functions are called scenarios, which consist of a set of
simultaneous controls used for arranging the room according
to the user’s lifestyle.
An example of a scenario can be represented by the
simultaneous activation of lights, shutters, etc., which can be
set by the user after getting home by using one single control
device or by using the Touch Screen menu. If the Automation
system is integrated with Sound system and Temperature
control system, the scenario can also set up a room with
background music and with the required temperature.
DIN
Dimmer
Rolling shutter
control
Touch Screen
Local
Control
Rolling
shutter
Lighting
Gateway
SCS/ZigBee
®
Radio
control
Radio remote
control
RADIO SYSTEM
DIN
actuator
To Next Page
Loading...
